[China Glass Net] The hot sun in summer is already awesome, and people can't stand it. Many new owners have already put the explosion-proof membrane in advance. If you haven't posted it yet, then you have to hurry up, or wait for your harsher roasting. For the car film, there are quite a few things to pay attention to, and for the owner, the poor quality of the explosion-proof film may not only cause poor insulation effect, but also because the light transmittance is not enough for the driving safety of the owner. Great impact. In this case, the owner of the car needs his own eyes for the safety and use of his own car. Next, let's talk to you about what you need to pay attention to in summer film!
How to choose a professional film location in the front
It is understood that well-known manufacturers have opened image stores and unified construction stores in major cities, and can find professional brand foil stores through the official website of the factory or in the large automotive products and accessories market. In addition, most of the current 4S stores can provide film service, but one thing that reminds you to pay special attention is: 4S shop in the case of falling profits, the fake film begins to gradually rampage, so be sure to ask the film when filming Brand and specific price.
The second professional film technology is very important
The process of film construction is complicated. Not all decoration shops are qualified to provide film service. Now many small shop film technology is definitely not qualified. Professional thermal insulation "explosion-proof membrane" needs "professional construction and installation", specifically the four major technologies of the film, these professional film technology is often seen in the brand's film shop.
The first is a dedicated dust-free film room. Automotive glass film, there must be no defects and debris particles, so the film must be constructed in the dust-free film. In addition to the closed door that is isolated from the outside, the top of the clean room should be equipped with a water mist sprinkler and air conditioner. The ground should have drainage ditch and special paint to achieve the purpose of dust removal and dust reduction.
Followed by professional construction tools. Some unprofessional stores usually use homemade tools and have a rough texture. Iron shovel is not only difficult to squeeze the water, it is easy to leave blisters, air bubbles, and more likely to scratch the film; carbon steel blades may scratch high-grade automotive glass. In addition, professional film dealers use special cleaning fluids and mounting fluids, which are diluted with pure water to achieve a better degree of cleanliness and a greater bond strength between the film and the glass.
Professional filmers are the top priority. The filming effect depends largely on the technical level of the filmmaker, especially the front windshield with a large curvature of the glass. The construction has certain difficulty. When the baking is slightly inadvertent, the glass will crack. Only the film can be adhered to the standard construction process to ensure the construction quality.
Inspection after the third film:
1. The front windshield crease does not exceed 1 (including one), the position is generally at the corners (no more than 10CM from the side); the rear windshield crease does not exceed one (including one); the position is generally at the corner The part (no more than 2CM from the side), no more than one side crease (including one) does not have creases in the effective range of the wiper. Sitting in the driver's seat, there is no blur or chromatic aberration in the scenery outside the car through the front gear.
2, all the glass after the film can not have blisters, the water must be scraped clean (observed from the left and right sides of the glass, you can see very clearly).
3, the film at the upper end of the side window is cut straight, the side window glass can not leak light when it rises to the top; the side window glass can not leak light on both sides (the film is outside the strip; the light is transmitted through the light); the edge of the auxiliary window glass is leaking, However, the larger distance does not exceed 1MM.
4. The large distance between the front and back film and the black ceramic point on the edge of the glass is not more than 2MM;
5, the glass at the film can not have obvious scratches.
6, side window strips can not have new scratches.
7, 1 meter away from the car to see the full range of glass film after the local range of 10CM, the number of dust points can not exceed 10.
8, individual metal film because of the multi-layer metal layer, metal film may appear in the baking film, but the position is generally not allowed in the middle of the edge (within 15CM from the edge).
Note after the fourth film:
1. After the film is applied, do not rush to use the defogging line.
2. Do not stick adhesive items directly to the film.
3. If there is fog, water, or blisters on the glass, please wait patiently for 2-3 days, and then gradually disappear after 2-3. If it does not disappear, return to the construction site for treatment.
Do you want to protect yourself during exercise,recover from injury as soon as possible?or enhance your fitness and weight loss effect? Hongxiangwen protective products are your best choice. Our support straps include Posture Corrector, Sport Knee Support, waist support, Wrist Support and Ankle Support. Most of the products are made of soft and breathable neoprene, and a few of them are made of high quality elastic materials. Posture Corrector Belt can relieve your back pain and correct your back posture. Knee Support with belt, Waist Band , wrist support, ankle brace protect your different joints, provide sufficient support for your joints, and help you recover from injury. A variety of customized services including size, color, logo are etc. Please fell free to contact us
Support Strap
Support Strap,Knee Support With Straps,Sport Knee Support,Posture Corrector Belt
Shenzhen Hongxiangwen Hook&Loop Co.,Ltd , https://www.hxwsports.com