The home living installation shower room has become a fashion, not only to achieve wet and dry separation, but also let us enjoy the shower, no longer have to worry about water splashing outside. The online shopping shower room is also an avant-garde, so how to solve the installation problem, the Eddie shower room manufacturers here give you a detailed explanation.
Home shower room installation process:
1. Install the bottom basin of the shower room. First of all, it is necessary to combine the parts of the bottom basin to determine the level of the bottom basin, to ensure that there is no water in the basin, the tube should be stretched with the distance, and then the bottom of the basin and the floor drain. The connection is firm. If the bottom basin is not used, the water strip in the shower room is to be affixed to the floor tiles when tiling. The reason for this is to have good water repellency.
2. Test and protection: After installation, water test should be carried out to ensure unimpeded flow. Find and punch: Use a pencil and a level to determine the drilling position of the aluminum against the wall and punch the hole with a hammer drill.
3. Install aluminum: Knock on the rubber in the hole and lock the aluminum bar to the wall with screws.
4. Fix the glass: Lock the glass to the hole in the bottom basin and fix it with screws.
5. Install the top tube: find the corresponding position drill hole above the fixed glass, install the (straight/oblique) fixed seat and connect the top tube. Secure it to the top of the glass with a bent sleeve.
6. Installation rack: Install the sanitary ware in the position of the calibration. 7. Install the movable door: Install the hardware of the movable door and install the hinge on the reserved hole of the fixed door. After the installation, adjust the position of the shaft core of the lotus leaf, and it is better to close the door.
8. Make waterproof: Install the suction strip or water retaining strip on the side or below the glass as required. Use aluminum mesh to seal the seam between the aluminum and the wall, glass and bottom basin.
9. Commissioning and fastening: Check whether all parts are comfortable and smooth, and find problems in time. After adjusting, tighten the corresponding screws to make the whole shower room firmer.
10. Finishing work: The decorative aluminum strip is stuck into the wall-mounted aluminum material to ensure that the appearance is neat and generous. Afterwards, wipe the entire bathroom with a rag.
Memory fabric features: good wrinkle recovery ability (good wrinkle effect and recovery ability are the characteristics of the latest international trend of functional fabrics), comfortable hand feel, soft luster, fine and soft texture, good drape, anti-pollution, chemical resistance Features such as performance, dimensional stability, anti-static, anti-ultraviolet, etc.
shape memory fabric,shape memory textiles,memory cloth fabric,fabric memory
WEIHUA TEXTILE , https://www.weihuatex.com